DynaMesh®

Tailored Implants made of PVDF

visible in TRM

DynaMesh® visible – Una “visione d’insieme” dettagliata senza rischi

Nella TRM, l’area del corpo analizzata viene esplorata mediante tecniche di imaging e scomposta in diversi “piani ottici sottilissimi”. Questi “piani“ insieme costituiscono immagini tridimensionali o sequenze di immagini (Re-Modelling):
la posizione dell’impianto DynaMesh® visible è visibile in dettaglio e controllabile.
Questo sguardo a tre dimensioni consente di ottenere importanti informazioni.

 

Chirurgia delle ernie

visible-grafik-02

 

Chirurgia del pavimento pelvico

visible-grafik-02-pelvic

Controllo problematico

In alcune indicazioni, è necessario controllare la corretta posizione dell’impianto dopo un determinato lasso di tempo. Eppure “guardare dentro” comporta dei rischi. Gli impianti a rete convenzionali non sono visibili con le tecniche di radiologia diagnostica. In determinate condizioni, i pazienti devono sottoporsi a un secondo intervento.

Una semplice alternativa

La tecnologia DynaMesh® visible è estremamente complessa – ma anche molto efficiente e sicura. Semplicemente: misceliamo il filamento in PVDF con micropigmenti ferromagnetici secondo un procedimento certificato, che garantisce un deposito ottimale dei pigmenti. Studi a lungo termine dimostrano che i micropigmenti vengono legati all’interno del polimero di PVDF in modo indissolubile, sono, per così dire, chiusi ermeticamente.

Una chiara visione

Gli impianti DynaMesh® visible sono visibili alla tomografia a risonanza magnetica (TRM) [7]; sia in sequenze standard sia in immagini tridimensionali a risoluzione elevata o addirittura in video. Il chirurgo può stabilire così la posizione e la condizione dell’impianto e in modo preciso. Se necessario, può perfino osservare se e come si comporta l’impianto in movimento.

Ottima guarigione

Poiché “guardale all’interno“ è così semplice e sicuro, DynaMesh® visible offre nuove prospettive: controllo senza rischio del processo di guarigione, monitoraggio ottimale nell’ambito di studi clinici, ma anche lo sviluppo più rapido di impianti innovativi e pionieristici, insieme a partner rinomati del settore clinico.

DynaMesh® visible è, inoltre, la prima tecnologia al mondo che consente di visualizzare impianti, certificata dal Ministero federale tedesco per l’Istruzione e la Ricerca (BMBF 01EZ 0849).

Chirurgia delle ernie

visible-grafik-01

Chirurgia del pavimento pelvico

visible-grafik-01-pelvic

Video: Animation of TAPP using a visible mesh
Information on the visualisation of DynaMesh visible implants using MRI

The basics

DynaMesh visible mesh implants can be visualised with magnetic resonance imaging (MRI). Ultrafine Fe3O4 iron particles, which are integrated into the dark threads of the mesh, produce local magnetic gradients between the mesh and surrounding area. These are displayed as small artefacts [1, 2] in suitable MRI sequences. These so-called susceptibility artefacts can be seen more clearly in gradient echo sequences (GRE) than (turbo) spin echo sequences. With MRI visualisation of visible mesh implants, it is therefore important to consider what is the central diagnostic question and to answer it with the appropriate sequence. In the clinical studies performed to date [3], a field strength of 1.5 tesla was used and the following sequences were tested and shown to be suitable:

MRI sequences
A detailed image of the mesh can be best achieved with GRE sequences where the surrounding structures are relatively homogeneous and displayed as hyperintense areas (Figure 1, left image). The susceptibility artefacts in the mesh should be clearly visible, yet not so strong that they overshadow the surrounding structures. In examinations to date on patients, these were T1-weighted GRE sequences with RF spoiling with a relatively small flip angle, a short repetition time, a short in-phase echo time and little signal averaging (for parameters see Table 1). This sequence enabled a precise assessment of the mesh configuration and clear distinction from postoperative air inclusions on the MRI images. However, it was not possible to make a satisfactory diagnostic assessment of the surrounding anatomy.

Another GRE sequence was developed in order to clearly visualise both the ferrous mesh and the surrounding structures (for parameters see Table 1). This sequence without RF spoiling was based on a standard clinical T1-weighted GRE sequence as, for example, used with pulse sequence protocols for abdominal and pelvic diagnostics. As a rule, it was demonstrated that sequences with echo times in opposed-phase (e.g., TE=2.3 ms) are not suitable for delimiting visible mesh implants because of the significant signal drop at fat/water boundaries. In the first patient study, the sequence shown in Table 1 was rated the best for assessing both the mesh and the anatomy, and represents a good compromise between the two sets of requirements; also see Figure 1, middle image.

Unlike MR contrast agents, both paramagnetic, gadolinium-based and superparamagnetic (SPIO) contrast agents, the iron particles integrated in the threads only influence the T2* relaxation time and not the T1 and T2 relaxation times [4]. This means that in sequences with refocusing pulses, i.e., spin-echo sequences, the meshes have either very little or no influence on the MRI image. Consequently, the mesh implant can, effectively, be rendered invisible, depending on the sequence type chosen (TSE instead of GRE). Accordingly, visible implants cannot be visualised sufficiently on T2-weighted TSE sequences. For precise visualisation of the anatomical structures, T2-weighted TSE sequences from pelvic examination protocols were used in the patient study; for the sequence parameters see Table 1. As also shown in preliminary studies [3, 5], this allows the surrounding anatomy to be assessed to the necessary degree without interference from the mesh implant; see Figure 1, right image.

Further visualisation options
In a few cases, the distinction between artefact and proton-low/-free tissue or air can be so limited that further, so-called positive-contrast techniques were used (1, 5). The general goal of these measures is the positive, i.e., hyperintense, visualisation of susceptibility artefacts, whilst all the other structures appear hypointense and, as far as possible, without signals. A variety of these techniques are described in the scientific literature, but generally these are techniques which require fairly far-reaching changes to the MR pulse sequences or complex post-processing of the images, and they often react sensitively to changes of any kind. Under suitable conditions (e.g., homogeneous surroundings, simple mesh structure etc.), the GRE sequences can be accelerated to the extent that dynamic cine and real-time sequences can also be measured and thus the mobility of the mesh implants can be observed.

Summary
DynaMesh visible mesh implants can be visualised with simple GRE sequences. For a detailed view of the mesh implant, GRE sequences similar to GRE1 are recommended. For detailed images of the anatomy, T2-weighted TSE sequences are ideal. In cases in which the position of the mesh in relation to the anatomical structures is particularly important and complex, additional GRE sequences which clearly visualise both the mesh and anatomy may be advisable. Table 1 provides an overview of the most suitable pulse sequences based on the patient study performed to date.

TR / TE [ms] Flip angle; Bandwidth per pixel; Signal averaging Field of view; Voxel size; Layer thickness
GRE1 (detailed mesh) 8.3 / 4.6 20°; 215 Hz; 2 350 mm²; 0.95 x 0.97 mm²; 5 mm
GRE2 (mesh plus anatomy) 244 / 4.7 80°; 567 Hz; 3 350 mm²; 0.9 x 1.1 mm²; 5 mm
T2wTSE (anatomy) 4372 / 80 90°; 246 Hz; 3 360 mm²; 0.7 x 1.04 mm²; 4 mm

Table 1: Overview of some of the parameters of the pulse sequences used in the first patient examinations.

visibe_tabelle_01
visibe_tabelle_02
visibe_tabelle_03

Figure 1: Examples of images of the pulse sequences used in the first patient examinations. GRE1 (left) was most suitable for the detailed delimitation of the mesh (dark line), GRE2 (middle) for assessing the position of the mesh vis-à-vis the surrounding anatomy, and conventional TSE sequences (right) were best at visualising the anatomy, whilst the mesh implant was only inadequately visualised.

References:
1. Kramer NA, Donker HC, Otto J, Hodenius M, Senegas J, Slabu I, Klinge U, Baumann M, Mullen A, Obolenski B, Gunther RW, Krombach GA:
A concept for magnetic resonance visualization of surgical textile implants
Invest Radiol, 2010. 45(8): p. 477-83

2. Slabu I, Guntherodt G, Schmitz-Rode T, Hodenius M, Kramer N, Donker H, Krombach GA, Otto J, Klinge U, Baumann M:
Investigation of superparamagnetic iron oxide nanoparticles for MR-visualization of surgical implants
Curr Pharm Biotechnol, 2012. 13(4): p. 545-51

3. Hansen NL, Barabasch A, Distelmaier M, Ciritsis A, Kuehnert N, Otto J, Conze J, Klinge U, Hilgers RD, Kuhl CK, Kraemer NA:
First In-Human Magnetic Resonance Visualization of Surgical Mesh Implants for Inguinal Hernia Treatment
Invest Radiol, 2013

4. Donker HC, Kramer NA, Otto J, Klinge U, Slabu I, Baumann M, Kuhl CK:
Mapping of proton relaxation near superparamagnetic iron oxide particle-loaded polymer threads for magnetic susceptibility difference quantification
Invest Radiol, 2012. 47(6): p. 359-67

5. Kraemer NA, Donker HC, Kuehnert N, Otto N, Schrading S, Krombach GA, Klinge U, Kuhl CK:
In vivo visualization of polymer-based mesh implants using conventional magnetic resonance imaging and positive-contrast susceptibility imaging
Invest Radiol, 2013. 48(4): p. 200-5


Premiata nel concorso per l’innovazione del auszeichnung-bundesministerium

L’attività di sviluppo è stata promossa dal Ministero federale tedesco per l’Istruzione e la Ricerca (BMBF 01EZ 0849)